Water Standard Drawings
These documents are technical CAD engineering drawings and may not be fully accessible to all users. If you need this information in an accessible format, please contact the Water Department at (208) 769-2210, and we will work with you to provide an accessible alternative.
All drawings have been updated as of October 1, 2024. Please contact the Water Department directly for AutoCAD files.
| DESCRIPTION | PDF FORMAT |
| 1” Coppersetter Standard Pit Settings | W-1 |
| Water Meter Locations | W-2 |
| Typical 6” Fire Hydrant Setting | W-3 |
| Fire Hydrant Locations | W-4 |
| 1”-2” Curb Stop C.I. Box Assembly | W-5 |
| Typ. Frost Free Blowoff Assembly | W-6 |
| 1” Air Relief Assembly | W-7 |
| Approved A.C. Main Replaced Crossing | W-8 |
| Thrust Blocking | W-9 |
| Thrust Block Bearing Area | W-10 |
| Pipe Bedding and Backfill for Water Mains | W-11 |
| Cast Iron Valve Box, Two Piece | W-12 |
| Valve Lid Adjustment | W-13 |
| 2” Coppersetter Standard Pit Setting | W-14 |
| 4” & Larger Dom. Meter Vault Set | W-15 |
| 4” and Larger Service Setting Irr. Vault | W-16 |
| 4” and Larger Dom. Service Vault Set | W-17 |
| Pressure Sustaining Valve Assembly | W-18 |
| Pressure Reducing Valve Assembly | W-19 |
| RPBA Premise Isolation Standard Method | W-20 |
| RPBA Premise Isolation Alt. Method | W-21 |
| Approved Atmospheric Vacuum Breaker | W-22 |
| Approved Pressure Vacuum Breaker | W-23 |
| 4” or Larger DC in Vault | W-24 |
| Approved 1” & 2” DC for Premise Isolation | W-25 |
| Approved DC for Irrigation System | W-26 |
| Approved Air Gap | W-27 |
| Monitoring Well Modifications | W-28 |
| Valve Operating Nut Extension | W-29 |
| 24” Manhole Cover for Meter Vault | W-30 |
| Typical Approved RP for Irrigation System | W-31 |
| Approved RP for Building Isolation | W-32 |
| 1” & 2” Service Reconnect | W-33 |
| Water Main Flushing Chart | W-34 |
| Approved Pressure Testing Method | W-35 |
| Allowable Leak Loss Table | W-36 |
| Approved RP for Premise Isolation | W-37 |
| Typical Approved DC for Building Isolation | W-38 |
| Service Abandoned at Corp Stop – IPS & PJ | W-39 |
| Service Abandoned at Corp Stop – Copper | W-40 |
| Abandoning AC Pipe Direct Tap Corp Stop | W-41 |
| Approved RP for Basement Isolation | W-42 |
| Approved DC for Basement Isolation | W-43 |
| Approved Large RP for Building Isolation | W-44 |
| Approved Large RP for Basement Isolation | W-45 |
| Approved Large DC for Building Isolation | W-46 |
| Approved Large DC for Basement Isolation | W-47 |
| PNWS – AWWA RP Discharge Rates | W-48 |
| 1” Sample Station Assembly | W-49 |
| Automatic Flushing Device | W-50 |
| Splice Kit Installation | W-51 |
| 4" and Greater Hot Tap | W-52 |
| Bollards | W-53 |
Contact Us
Phone: (208) 769-2210
3145 N Howard St
Coeur d’Alene, Idaho 83815
After Hours Emergency
Contact: (208) 755-9729
Contact: (208) 755-9729
Hours
Mon — Fri 8am — 5pm